Product ID:POLYAMIDE RESIN, 386
MSDS Date:06/01/1992
FSC:9330
NIIN:00N044050
MSDS Number: BSBWL

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MUG0

Telephone: 716-265-0413

Cage: 0MUG0

POLYAMIDE RESIN

CAS: 68139-70-8

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:LD50: (ORAL,RAT) 15 G/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE AND RESPIRATORY IRRITANT. EXTREME
INHALATION OF VAPORS CAN CAUSE DEATH BY PARALYSIS OF THE RESP
CENTER. HEADACHE, TIREDNESS AND NAUSEA AND OTHER EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH AFFECTED AR EA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING.
INGEST: GET MD IMMEDIATELY .

Extinguishing Media:CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:IN THE FORM SHIPPED, SWEEP UP AND DISCARD;
MOLTEN SPILLS-LET SOLIDIFY THEN PICK UP AND DISCARD AS IN WASTE
DISPOSAL METHOD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE.
Other Precautions:THIS MATERIAL IS INTENDED FOR LABORATORY USE ONLY. IT
IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:IF NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPR CHEMICAL SAFETY GOGGLES
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:>127F,>53C
Spec Gravity:0.90
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID, DICED, LIGHT AMBER PARTICLE W/SLIGHT
RESINOUS ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.

Waste Disposal Methods:DISPOSE OF IN AN APPROVED LANDFILL WITH FEDERAL,
STATE OR LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.